特殊功能調速閥
清單
照片附殘壓排氣閥調速閥 AS
| 型式 | 系列 | 氣缸側 連接口徑 | 適用氣壓管 外徑 |
|---|---|---|---|
| With One-touch fittings, Elbow/Universal type | AS□□□1FE | 1/8 ～ 1/2 | φ4 ～ φ12 |
| Metal body, In-line type | AS□000E | 1/8 ～ 1/2 | - |
附氣引導式逆止閥調速閥 ASP
| 型式 | 系列 | 氣缸側 連接口徑 | 適用氣壓管外徑 公釐尺寸 | 適用氣壓管外徑 英吋尺寸 |
|---|---|---|---|---|
| 附氣引導式逆止閥 調速閥 | ASP | 1/8 ～ 1/2 | φ6 ～ φ12 | φ1/4'' ～ φ1/2'' |
Speed Exhaust Controller with One-touch Fitting Compact Type
JASV
| Type | Series | Port size | Applicable tubing O.D. Metric size | Applicable tubing O.D. Inch size |
|---|---|---|---|---|
| Speed Exhaust Controller | JASV | M3×0.5 M5×0.8 10-32UNF R, NPT, G 1/8 | φ3.2 to φ6 | φ1/8'' to φ1/4'' |
快速排氣調速閥 ASV
| 型式 | 系列 | 連接口徑 |
|---|---|---|
| 快速排氣調速閥 | ASV120F/220F | M3,M5 |
| 快速排氣調速閥 | ASV310F/410F/510F | 1/8 ～ 1/2 |
Deceleration Controller DAS
-
・2-speed control reduces cycle time
Allows for the impact relaxation of the stroke end
Allows for the 2-speed control of cylinders
The deceleration position (cushion timing) and 2nd speed (cushion
intensity) can be adjusted.
・Possible to control flow rate values using an adjustment handle with
graduations
・Space saving
Maximum 76% reduction of occupying space (196 cm3 ← 811 cm3)
| Type | Series | Applicable tubing O.D.
Metric | Applicable tubing O.D.
Inch | Applicable cylinder range |
|---|---|---|---|---|
| Deceleration controller | DAS5-□ | φ4 to φ8 | ø5/32" to ø5/16" | ø10 to ø40 |
| Deceleration controller | DAS7-□ | φ8 to φ12 | ø5/16" to ø1/2" | Up to ø100 |
[Model with Residual Pressure Release Function] Compact Indicator Type Speed Controller with Pilot Check Valve ASP-S
-
・Flow rate control is possible via the compact indicator.
・Model with residual pressure release function: Cylinder pressure
can be manually released.
・Model without residual pressure release function: Temporary
intermediate stops are possible.
・Horizontal and vertical types are available, which can be selected
depending on the installation conditions.
・Easily mounted using a hexagon wrench
| Type | Series | Port size on the cylinder side | Applicable tubing O.D. Metric size |
|---|---|---|---|
| Universal Vertical type | ASP-SUA | M5×0.8 10-32UNF G 1/8, 1/4, 3/8, 1/2 | φ4 to φ12 |
| Universal Horizontal type | ASP-SUB | M5×0.8 10-32UNF R, NPT, G 1/8, 1/4, 3/8, 1/2 | φ4 to φ12 |
