SI 單元
串列傳輸系統 EX600
系列 | 保護構造 | 通訊協定∗ | 適用電磁閥 |
---|---|---|---|
EX600 | IP67 | PROFIBUS DP DeviceNet™ CC-Link EtherNet/IP™ EtherCAT® Ethernet PROFINET Modbus/TCP (訂製品) POWERLINK (訂製品) | SY3000,5000,7000 (插入式) SV1000,2000,3000 VQC1000,2000,4000 S0700(IP40) |
產品特點
These units are capable of connection using a D-sub connector. There are three types of units, for digital input, output, and input/output. The Digital Output Unit can be connected with an SMC manifold solenoid valve F kit (D-sub connector).
![](/newproducts/en/ex600/images/04.jpg)
These terminal block units are compatible with individual wiring configurations. There are three types of units, for digital input, output, and input/output. Wiring connection to a sensor connector box, etc., can be carried out easily using only a flat head screwdriver.
![](/newproducts/en/ex600/images/05.jpg)
This Unit is for inputting a digital signal (ON/OFF signal). The signal of a 2-wire/3-wire auto switch attached to the actuator can be acquired to feedback a signal to the PLC. The control signal of an entire system can be managed by Fieldbus System.
![](/newproducts/en/ex600/images/06.jpg)
A unique clamping method is adopted to prevent screws from falling out.
It is easy to separate the unit just by loosening bracket screws.
![](/newproducts/en/ex600/images/11.jpg)
The following functions are available for the dual port EtherNet/IPTM product (EX600-SEN3/4).
・Added Compatible Topologies (connection configuration).
![](/newproducts/en/ex600/images/12.jpg)
・QuickConnectTM Function Available
In the case of a tool changer, it takes about 10 seconds for the communication to be connected in common EtherNet/IPTM products, after the power of the device installed on the tool is turned ON. Since the QuickConnectTM function* is available in the EX600-SEN3/4, the communication can be connected in about 0.5 seconds.
![](/newproducts/en/ex600/images/13.jpg)
・Built-in Web Server Function
The EX600-SEN3/4 has a built-in web server function, which enables status checks, parameter settings and forced output of the EX600 using general-purpose web browsers, such as Internet Explorer. Start-up of the system and maintenance can be performed efficiently.
![](/newproducts/en/ex600/images/14.jpg)