產品目錄

產品情報 » 旋轉缸/氣壓夾爪  » 磁鐵式吸盤

磁鐵式吸盤

磁鐵式吸盤 MHM

產品特點
    ・用磁石可吸着・保持重物
    ・保持力：最大1000 N (ø50, 工作物厚度6mm時)
    ・不使用真空，即可搬送鋼板
    　對應無法使用真空吸盤的有洞、凹凸不平及複雜形狀的工作物
    ・可調整保持力 (吸著力)
    ・防止落下: 即使切斷空氣，也可保持工作物
安全上的注意　磁簧開關/共通注意事項　綠色對應 (RoHS)
系列最大保持力 [N] (工作物厚度） [mm])
MHM-1650(6)
MHM-25200(6)
MHM-32500(6)
MHM-501000(6)

Magnet Gripper/3-Position Type ø32 MHM-X7776

產品特點
    ・Allows for high-speed transfer
    　Prevents the accidental attraction of a second workpiece
    　and allows for high-speed transfer. Improved cycle time
    ・Gripper mountable on 3 surfaces (Excludes the port side)
    ・Stopper (scale) allows for holding force adjustment and improved
    　visibility
  • 2D/3D CAD

    能以各種數據格式輸出支持所有型號的2D/3D CAD數據。
    能在安裝了選購件、歧管的狀態下輸出。

    查看 2D/3D CAD
  • Magnet Gripper/3-Position Type ø32 MHM-X7776
    歧管規格
    Series 查看搜尋結果
    MHM-X7776查看搜尋結果
SeriesBore size [mm]Max. holding force [N] (Workpiece thickness [mm])
MHM-X777632250 (2)
500 (6)

Magnet Gripper MHM-X6400

產品特點
    ・Steel plates can be transferred without a vacuum.
    　Can support workpieces with holes and uneven surfaces when a vacuum pad cannot be used
    ・Holds workpieces even when the air is shut off
    ・High holding force: 80 N (Workpiece plate thickness: 0.6 mm), 120 N
    　(Workpiece plate thickness: 1.4 mm)
    ・Residual holding force: 0.3 N or less (Reduces workpiece release time)
  • 2D/3D CAD

    能以各種數據格式輸出支持所有型號的2D/3D CAD數據。
    能在安裝了選購件、歧管的狀態下輸出。

    查看 2D/3D CAD
Safety Instructions　Auto Switches/Precautions　Green Procurement (RoHS)
SeriesHolding force (Workpiece plate thickness: 0.6 mm)
MHM-32D1-X640080 N
MHM-32D2-X640050 N
MHM-32D3-X640030 N

Go Top