產品目錄

產品情報 »  產品目錄  » 電動驅動器/單軸機器人  » 協作機械手臂用 真空夾取單元

協作機械手臂用 真空夾取單元

Electric Gripper for Collaborative Robots (zh-tw) LEHR

產品特點
    ・Can be used with the collaborative robots of UNIVERSAL ROBOTS,
    　FANUC CORPORATION, and OMRON/TECHMAN ROBOT
    ・2 variations are available.
    ・Gripping force: 60 to 140 N
    ・Operate by simply connecting 1 electrical wire
    ・Annual CO2 emissions reduced by up to 52% through motor control
    　optimization (SMC comparison)
    ・With internal battery-less absolute encoder
    ・Easy tool changing (Manual changer)
    ・Compatible plug-in software: URCap
Safety Instructions　Electric Actuators/Precautions　Green Procurement (RoHS)
TypeSeriesOpening/Closing stroke [mm]Gripping force [N]
For collaborative robotsLEHR5060 to 140

Electric Gripper for Collaborative Robots LEHF32EK2-64-□□-XA147
for Universal Robots

產品特點
    ・The positioning, speed, and gripping force can be set.
    ・Due to the built-in battery-less absolute encoder, a return to origin
    　operation is not necessary when the power supply is recovered.
    ・Standards: Conforming to ISO9409-1-50-4-M6
  • 2D/3D CAD

    能以各種數據格式輸出支持所有型號的2D/3D CAD數據。
    能在安裝了選購件、歧管的狀態下輸出。

    查看 2D/3D CAD
    2D CAD
    查看 2D CAD
  • Electric Gripper for Collaborative Robots LEHF32EK2-64-□□-XA147
    for Universal Robots
    說明書
    Type Series 查看搜尋結果
    For collaborative robotsLEHF32EK2-64-□□-XA147查看搜尋結果
Safety Instructions　Electric Actuators/Precautions　Simplified Selection Flow Chart　Green Procurement (RoHS)
TypeSeriesOpening/Closing stroke [mm]Gripping force [N]
For collaborative robotsLEHF32EK2-64-□□-XA1476460 to 120

Electric Vacuum Gripper for Collaborative Robots (zh-tw) ZXPE5

產品特點
    ・A vacuum gripper that doesn't require an air source
    ・Operation possible by simply connecting an electrical wire connector
    　Can be used without an air source due to the built-in vacuum pump
    ・Unitization of the peripheral devices required for adsorption
    　The vacuum pump, atmospheric release valve, pressure monitor,
    　and cups have been integrated.
    ・Current consumption: Max. 64% reduction
    　Energy-saving operation possible via automatic/manual modes
    ・Lightweight: 556 g
    ・A wide variety of cup variations are available to support a wide range of
    　workpiece shapes.
    ・Standards: Conforming to ISO9409-1-50-4-M6

    ∗1 These are the values under SMC measurement conditions when the gripper is in continuous mode (the vacuum pump working continuously) and may vary depending on the
    atmospheric pressure (weather, altitude, etc.) and the measurement method.
    ∗2 May be restricted depending on the cup diameter, mounting orientation, or workpiece. Please use within the max. work load. Suction and transfer exceeding the max. work load may result in product failure and the dropping of workpieces.
Safety Instructions　Vacuum Equipment/Precautions　Series Variations/Model Selection
Green Procurement (RoHS)
SeriesCup formCup diameterMax. suction flow rate*1 [L/min(ANR)]Max. work load*2
ZXPE5Flat
Flat with rib
Bellows
Thin flat
Multistage bellows
2.5-stage bellows
5.5-stage bellows
Flat type for film packaging workpieces		φ8 to φ324.55

Go Top