电子式压力开关/压力传感器(传感器、放大器一体型)
3色显示 数字式位置传感器 ISA3
系列 | 额定距离范围 | 配管规格 供给侧 | 配管规格 检测側 |
---|---|---|---|
ISA3-F | 0.01~0.03mm | Rc, G 1/8 | φ4, φ6快换接头, G 1/8 |
ISA3-G | 0.02~0.15mm | Rc, G 1/8 | φ4, φ6快换接头, G 1/8 |
ISA3-H | 0.05~0.30mm | Rc, G 1/8 | φ4, φ6快换接头, G 1/8 |
产品特点
Check at a glance if the workpiece is placed or not.
The clearance distance between the detection surface and the workpiece can be found intuitively.
![](/newproducts/en/isa3/images/01.jpg)
A simple operation to enter the switch point value
(point at which the clearance reaches the switch point value)
![](/newproducts/en/isa3/images/02.jpg)
The sub screen display can be selected from 6 display options
![](/newproducts/en/isa3/images/03.jpg)
Measures against drainage
Drainage resistance:10 times or more
* Based on the SMC’s specific testing condition (oil proof test).
* Compared with the ISA2.
Withstand pressure expanded
Max.:600 kPa(3 times* compared with the ISA2)
* Compared with the ISA2 with 0.2 MPa pressure gauge.
High pressure flushing is possible.
* The switch output will be OFF during flushing.
Display OFF mode
![](/newproducts/en/isa3/images/15.jpg)
Display OFF mode can be selected. The display can be turned OFF to reduce power consumption.
Display color
![](/newproducts/en/isa3/images/16.jpg)
The color of the main display can be set to change depending upon the output activity. The display color change makes visual identification of the output ON/OFF easier.
Unit conversion
![](/newproducts/en/isa3/images/17.jpg)
The pressure unit displayed on the sub screen can be changed.
Security code
![](/newproducts/en/isa3/images/18.jpg)
By activating the security code, the key lock cannot be released without entering a security code.
Displayed value compensation
The displayed value can be corrected within ±20% R.D. of the displayed value at the time of shipment.
Forced output
The output can be fixed to an on/off state when starting the system or during maintenance. This enables confirmation of the wiring and prevents system errors due to unexpected output.
Zero-clear of pressure display
The pressure value displayed on the sub screen can be cleared to zero.